PARTH VALVES AND HOSES LLP

SAFETY VALVES MANUFACTURER A safety valve is a valve that acts as a fail-safe . An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler , pressure vessel , or other system , when the pressure or temperature exceeds preset limits. Pilot-operated relief valves are a specialized type of pressure safety valve. A leak tight, lower cost, single emergency use option would be a rupture disk . Safety valves were first developed for use on steam boilers during the Industrial Revolution . Early boilers operating without them were prone to explosion unless carefully operated. Vacuum safety valves (or combined pressure/vacuum safety valves) are used to prevent a tank from collapsing while it is being emptied, or when cold rinse water is used after hot CIP (clean-in-place) or SIP (sterilization-in-place) procedures. When sizing a vacuum safety valve, the calculation method is not defined in any norm, particularly in the hot CI

VALVES MAINTENANCE A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or Slurries by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva , the moving part of a door, in turn from volvere , to turn, roll. The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems. Valves have many uses, including controlling water for irrigation, industrial uses for controlling